Stainless Steel 410 Spiral Point
Passivated 410 steel can be used to drill stainless steel substrates such as SUS-304. Compared to steel, stainless steel is more difficult to drill since stainless steel consumes more energy than steel before it elongates and breaks. But a drilling tip made of 410 steel can overcome the issue. If you are dealing with more than 6-mm-thick stainless steel, you can consider this 410-series product.Spiral self-drilling screws are Sun Through's signature product. Only the top professionals with solid skills in heat treatment and bi-metal welding can make this special product happen. The twist geometry significantly increases drilling capacity material removal during drilling, saving working time by up to 50%, compared to regular self-drilling screws
The sample in this photo is passivated SS410, IHWH 6.3x50mm Q9.
Carbon Steel or SS410 | ||||||
Drilling point size | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 |
Drilling capacity | 12mm | 15mm | 18mm | 21mm | 25mm | 30mm |
Nominal size | customized from 5.5 to 8.0 (#12 to #14 above) | |||||
Length | customized from 38mm~350mm | |||||
Material | C1018/C1022/SS410 | |||||
Bi-metal | ||||||
Drilling point size | Q5 | Q6 | Q7 | Q8 | Q9 | |
Drilling capacity | 12mm | 15mm | 18mm | 21mm | 25mm | |
Nominal size | customized from 5.5 to 7.0 (#12 to #14 above) | |||||
Length | customized from 38mm~350mm | |||||
Material | A2/A4 | Steel Alloy |
*** specifications can be customized, contact us for specific specs***